"Pete Rittwage" <email@example.com> writes: > Be aware this hack does not make the drive completely invisible. Many > fastloaders (speeders) will not work with the other lines still connected. I'd love to know more details about that - a sample program with a failing loader would be best. The drive is supposed to not touch the clock and data lines while ATN is high and it is not in listener or talker state, so just disconnecting ATN should be sufficient. The only issue I can think if is additional capacitive load on the serial bus due to the longer cable, which could cause issues for fastloaders whose setup-to-sample time is too fast - but that wouldn't apply to the C128D(CR) because its internal bus is much shorter than a standard serial cable. -ik Message was sent through the cbm-hackers mailing listReceived on 2015-09-05 20:00:45
Archive generated by hypermail 2.2.0.