Re: final cartridge for vic 20

From: didier derny <>
Date: Sat, 11 Jul 2015 08:02:01 +0200
Message-ID: <>
I'm mainly interested by the flash/ram functions, I have a disk on 
sdcard working really well
I also found this product
but I find it quite expensive...

I'll probably end with a small board plugged on the 6502 socket with 
6502 + gal + ram
to implement only the ram and let the cartridge connector free


On 11/07/2015 02:55, Nils Eilers wrote:
>> Do you know any reliable vendor selling this product or any similar product  ?
> Well, I always regarded Donald as very reliable. The only issue is: it may take time or sometimes even lots of time.
> Unfortunately, he's plagued regularly by serious health problems and the German postal workers on strike don't make things easier.
> I'm not aware of any other seller.
> If you're brave enough to produce your own boards, I could contact the layouter who made the first, smaller PCB if I may provide the Eagle .brd file. However, you'd also have to program the kind of exotic ATF1504 CPLD and the Atmel ATmega1284P controller on your own.
> Nils
>         Message was sent through the cbm-hackers mailing list

       Message was sent through the cbm-hackers mailing list
Received on 2015-07-11 07:00:07

Archive generated by hypermail 2.2.0.