Re: CBM720 heads up

From: william degnan <*billdegnan_at_gmail.com*> Date: Fri, 2 Jan 2015 13:55:20 -0500 Message-ID: <CABGJBuf+T+znVyNYMn9+utipsQ-iExiCqZgY+eRDzJAbRZXUHA@mail.gmail.com> · billdegnan_at_gmail.com

Please do!

On Fri, Jan 2, 2015 at 1:53 PM, Steve Gray <sjgray@rogers.com> wrote:

> I wrote a simple CBM-II terminal program in BASIC. If anyone is interested
> I can dig it out and post it.
>
> Steve
>
>  ------------------------------
>  *From:* A. Fachat <afachat@gmx.de>
> *To:* cbm-hackers@musoftware.de
> *Sent:* Friday, January 2, 2015 11:43 AM
> *Subject:* Re: CBM720 heads up
>
> Hi Michau,
>
> Du you have instructions how to use the RS232 from BASIC?
> I tried with a program copied from the C64, but did not succeed.
>
> Many thanks
> André
>
>
>
>
> On Friday 02 January 2015 15:30:55 you wrote:
> > Hello!
> >
> > A. Fachat wrote:
> > > However, I'm looking for a working program to test the RS232
> interface. I
> > > found the (two) CBM TERM program(s) - but unfortunately I have no idea
> how
> > > they work.
> >
> > You can use BASIC to open a channel and print to the RS-232 port, and
> > use Hyperterminal on the PC side to see if the received characters
> > match. The BASIC syntax for the RS-232 port is very similar to the C64
> > syntax.
> >
> > Regards,
> > Michau.
> >
> >        Message was sent through the cbm-hackers mailing list
>
>
>       Message was sent through the cbm-hackers mailing list
>
>
>

       Message was sent through the cbm-hackers mailing list