Re: CBM720 heads up

From: Bill Degnan <*billdegnan_at_gmail.com*> Date: Fri, 2 Jan 2015 13:10:25 -0500 Message-ID: <20150102181025.GA2891@raspberrypi> · billdegnan_at_gmail.com

I am sending this message from an actual vt102 terminal.  Works with mutt perfectly, using ttyUSB0 (usb to serial cable) at 9600 8/N/1.

b

On Fri, Jan 02, 2015 at 05:43:55PM +0100, A. Fachat wrote:
> Hi Michau,
> 
> Du you have instructions how to use the RS232 from BASIC?
> I tried with a program copied from the C64, but did not succeed.
> 
> Many thanks
> Andr?
> 
> 
> On Friday 02 January 2015 15:30:55 you wrote:
> > Hello!
> > 
> > A. Fachat wrote:
> > > However, I'm looking for a working program to test the RS232 interface. I
> > > found the (two) CBM TERM program(s) - but unfortunately I have no idea how
> > > they work.
> > 
> > You can use BASIC to open a channel and print to the RS-232 port, and
> > use Hyperterminal on the PC side to see if the received characters
> > match. The BASIC syntax for the RS-232 port is very similar to the C64
> > syntax.
> > 
> > Regards,
> > Michau.
> > 
> >        Message was sent through the cbm-hackers mailing list
> 
> 
>        Message was sent through the cbm-hackers mailing list

       Message was sent through the cbm-hackers mailing list