Thanks to all, Obviously it was this case, keys not correctly released at key up event -- Didier -----Message d'origine----- De : firstname.lastname@example.org [mailto:email@example.com] De la part de HÁRSFALVI Levente Envoyé : mercredi 26 novembre 2014 22:37 À : firstname.lastname@example.org Objet : Re: commodore c116 starting in the monitor instead of the basic Hi! First, any members of this series will start up and drop you into Tedmon if no Basic ROM can be found during boot. (As to how and why the Basic is unavailable, might be another story... that is, physically absent, nonfunctional, some problems with ROM CS' decoding etc. etc.) Second, these machines would also start up in Tedmon if one holds Run/Stop down during reset or powerup. As you said, your usb thing is not fully correct yet, it might be accidentally holding Run/Stop. Levente On 2014-11-26 22:15, didier derny wrote: > My commodore 116 is starting in the monitor at power up instead of the > basic > > I’m experimenting my usb interface for the commodore 116 > > It’s the first time I connect it…. > > Some characters are working, visibly when I it a key it the key is > displayed on the screen > > (my table is only partial, I only have letters) > > The deselection at key up is not correct > > But this c116 entering the monitor at power up is a mistery… > > On the pet there was a way to enter the monitor from a line on the > user port > > But no user port on the C116 > > Any idea ? > > -- > > Didier > Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2014-11-26 22:02:29
Archive generated by hypermail 2.2.0.