Re: 1526 printer - repair(able) or not?

From: Gerrit Heitsch <>
Date: Wed, 09 Apr 2014 19:13:41 +0200
Message-ID: <>
On 04/09/2014 07:03 PM, Ville Laustela wrote:
>  There is still one fault: all
> the letters are missing a dot on the top of the character. The flat
> cable between the print head and the PCB might have a bad contact or
> there is a pin stuck in the print head.

Or the port bit that controls that pin is dead somewhere between the 
I/O-Chip and the printhead. Swap the two 6532 and see if it makes a 


       Message was sent through the cbm-hackers mailing list
Received on 2014-04-09 18:00:59

Archive generated by hypermail 2.2.0.