On 2014-02-28 at 16:09:04, Anders Carlsson (firstname.lastname@example.org) wrote: > Most probably it is an owner modification. If I understood correctly, > the > actual C16 case is a bit smaller than the VIC/C64 cases, which > makes it hard > to fit e.g. a C64 motherboard in a C16 case, but the other way around > works > well if you use your Dremel appropriately. Cases are the same size. Only different material was used. I don’t remember now exactly how the C16 cases looked inside (I’d need to bring and open one - can do it if you like) but I’d bet on them being done off the same tools with only different mixture for the injection. […] > It is curious that a such model would be on display on a museum, > without any > note that the specimen does not resemble the common production > model. Well… what if the custodian is not affected by the same illness as most people in this group? ;-) -- SD! Message was sent through the cbm-hackers mailing listReceived on 2014-02-28 22:00:07
Archive generated by hypermail 2.2.0.