On 07/07/2013 03:08 PM, firstname.lastname@example.org wrote: > > On 2013-07-07, at 14:55, Gerrit Heitsch wrote: > >>> http://ist.uwaterloo.ca/~schepers/MJK/pics/c64pcbvoPAL.jpg >>> >>> I think I never had this one in my hands and it seems to have different ROM ICs' placement raster, which I am very much curious about. Also what is the ASSY# there? 226259 as it looks or 326298, which would mean it to be the 5-pin DIN video output... >> >> The board number seems to be 326298, as far as I can read it on the board itself (below the SID). >> >> Also, here's another picture of it: >> >> http://www.cbmhardware.de/c64/c64board.php > > I see - that one is better readable. So this is in fact the "5 pin" one. The order of the ROM ICs seems to be the same as in other "wide" boards but the raster is different. Do you happen to have one like this and would be able to measure the raster? Is it like in the SX? Somehow it looks to me even bigger. I could possibly do some scaled measurement from the picture But wouldn't like to miss some mils.. I don't have one like this, my oldest is a KU (which already has an 8pin Video output) which also has a different ROM spacing. If you want, I can mail you a HiRes-photo of a KU. As for the raster... so far all boards I had use a raster based on 1/10th" (2.54mm), not only between pins, but also between ICs. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2013-07-07 14:00:31
Archive generated by hypermail 2.2.0.