Related...I found something for the C64 called the Quikdisk, also by the makers of the PEDISK. http://www.megalextoria.com/usenet-archive/news013f2/b27/net/micro/00007383.html Perhaps it might be helpful if we could find one of these as well. Steve >________________________________ > From: Mike Naberezny <email@example.com> >To: firstname.lastname@example.org >Sent: Wednesday, July 3, 2013 4:50:42 PM >Subject: Re: Anyone have any info on the PEDISK II floppy controller? > > >Hi Ethan, > >On 7/1/13 1:06 PM, Ethan Dicks wrote: >> If you want some help with reverse-engineering the schematic, I >> could probably help there. Your bare-board pics are excellent for >> that! > >If you would like to work on it, your help would be welcome. I plan to draw >the schematic but it may be some time before I get to it. > >I reassembled the board and the computer no longer crashes. When it is >activated with SYS 59904, the ROM displays the banner and attempts to boot the >disk. I have a disk but it is in poor condition. I have not been able to try >it yet because I need to repair the cables first. > >Lee Davison did an initial disassembly of the ROM that is now linked from my >page. I have been working on it also. The ROM contains code to read/write >sectors and possibly the LOAD command. The remaining functions are in RAM. > >Regards, >Mike > >-- >Mike Naberezny (email@example.com) http://6502.org/ > > > Message was sent through the cbm-hackers mailing list > > > Message was sent through the cbm-hackers mailing listReceived on 2013-07-04 15:00:07
Archive generated by hypermail 2.2.0.