Thanks for that very useful information. Dave > Message Received: Apr 20 2013, 08:41 PM > From: "Michał Pleban" <firstname.lastname@example.org> > To: email@example.com > Cc: > Subject: Re: Help with GAL needed > > Hello! > > firstname.lastname@example.org wrote: > > > Atmel now appear to have picked up manufacture of GAL devices (see the Atmel website and look for ATF16V8C for an example). > > They have WinCUPL as the development tool. > > I have never used the Atmel devices though (I still have a stock of Lattice chips to use up first). > > Atmel WinCUPL produces JED files that can be programmed onto Lattice > GALs without any modification (tested personally). > > However, programming methods are apparently not the same - my programmer > can program Lattice GALs, but not Atmel. I need to look into this. > > Regards, > Michau. > > > Message was sent through the cbm-hackers mailing list > Message was sent through the cbm-hackers mailing listReceived on 2013-04-21 16:00:08
Archive generated by hypermail 2.2.0.