Hello Teddy, Wednesday, April 3, 2013, 1:52:24 PM, you wrote: > There are no markings on the board to show which is pin 1 Pin 1 is easy to spot. on a SCSI1 cable, every ODD pin except 25 is GROUND - so you'll see one side of the pins are all strapped together on the PCB. Orient the cable so that the red stripe connects to this pin. (looking down the CONNECTOR, it will be on the left hand side.) Julian Message was sent through the cbm-hackers mailing listReceived on 2013-04-02 23:00:44
Archive generated by hypermail 2.2.0.