Hello, > Should indeed be easy to rebuild. I think it, too. But we need the complete netlist. There are some unknown lines under the ics. > What type of IC is u1? That is not readable... On my pictures this must be a 74LS258! That's my component list: U1: 74LS258 U2: 74LS174 U3, U9: 74LS257 U4: 74LS244 U5: 2532 (from 8296 board) U6: Socket to UC5 on 8296 board U7: 74LS05 U8: 74LS155 U10: Socket to UC9 on 8296 board U11: 6545-1 U12: Socket to JU1 to JU7 on 8296 board U13: 74LS02 > where do the lines on the flat ribbon cable go? That goes in the same orientation to JU1 to JU7 on the 8296 board! Greetings Martin Message was sent through the cbm-hackers mailing listReceived on 2012-10-02 11:00:11
Archive generated by hypermail 2.2.0.