Re: C64 PWR switches

From: Gerrit Heitsch <>
Date: Mon, 10 Sep 2012 17:06:46 +0200
Message-ID: <>
On 09/10/2012 04:01 PM, Anders Carlsson wrote:
> There has been discussion threads both on Lemon64 and
> about C64 power switches.

If you're not afraid to do some bending and soldering of the contacts 
and replacing the rocker, you can use 420 632 from 
Withoung bending and only replacing the rocker, it should fit in the 
plus/4 or C16.

I was able to reuse the rocker from the old switch (made by a different 
maker) with on the one mentioned above. Looks normal from the outside, 
works like new. I have a picture of the result, will mail directly on 

Otherwise, you can also get one that fits directly from here:

Used that on an Oceanic OC-168N without problems. But it costs more than 
the one that needs some assembly...


       Message was sent through the cbm-hackers mailing list
Received on 2012-09-10 16:00:11

Archive generated by hypermail 2.2.0.