On 07/05/2012 02:44 PM, firstname.lastname@example.org wrote: > > I've tested head's wire continuity that is okay for all wires but I > can't find any reference for expected values - I've values for ALPS for > pin 1-5 that should be 32 ohms - I'm currently at 24 ohms. If I take pin > 1-3 or pin 3-5, I have 12 ohms, so, what seems to be coherent. Looks OK to me... Whenever I came about a drive with a dead r/w head, one connection was always broken (infinite resistance). If all connections were showing low ohm values (but not zero), it was never the head but something else that was the problem. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2012-07-05 17:00:04
Archive generated by hypermail 2.2.0.