Re: VIC II on sx64

From: Gerrit Heitsch <*gerrit_at_laosinh.s.bawue.de*> Date: Thu, 29 Mar 2012 16:37:53 +0200 Message-ID: <4F7473C1.5060001@laosinh.s.bawue.de> · gerrit_at_laosinh.s.bawue.de

On 03/29/2012 12:01 AM, publicmailbox@harsfalvi.net wrote:
> Hi!
>
>
> For a PAL SX-64, you'll need a 6569.
>
> The 8565 is not a direct replacement, although possible to use if
> absolutely neccessary (needs a small hack).

Even worse, plugging a 8565 into a socket for a 6569 will very likely 
destroy the chip. The 6569 needs +12V on pin 13 where the 8565 expects 
only +5V.

  Gerrit

       Message was sent through the cbm-hackers mailing list