I looked it up in the schematics, the dongle should be reachable from the 6502 side, so it should be easier for us 6502 guys to test it, compared to having to write 6809 code :-) André -- Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet. Mike Naberezny <mike@naberezny.com> schrieb: Hi Olaf, On 2/4/12 3:31 PM, Rhialto wrote: > That is a good plan, except for one thing: I don't have one :-) I have a working SuperPET. I'm not very familiar with 6809 assembly but I can type commands into the monitor or run a binary if you send me one. If it turns out that the 6702 is only for protection, it would be great if the Waterloo software could be cracked to run without it. On 3-board SuperPETs, the 6702 is on a small daughterboard and some machines have probably lost it. The 6702 is also the only component preventing a modern SuperPET replica. Regards, Mike -- Mike Naberezny (mike@naberezny.com) http://6502.org Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2012-02-05 12:00:04
Archive generated by hypermail 2.2.0.