Re: sd2iec ported to petSD

From: Nate Lawson <>
Date: Mon, 30 May 2011 21:26:10 -0700
Message-ID: <>
On the other side of things, IEEE support has been added to the xum1541
firmware a few weeks ago. So the next binary distribution of OpenCBM
will let you access IEEE-488 drives via ZoomFloppy from your PC.

Thanks to Tommy Winkler for that work.


On 5/30/2011 1:35 PM, Steve Gray wrote:
> For me, a simple solution that plugs directly onto the PET IEEE card edge 
> connector would be best. I'm not likely to have additional drives. If a solution 
> can be made that's small and simple that would be great. It's too bad there is 
> no power on the IEEE connector to power the unit, so we'd need to tap the 
> cassette port again. I'd probably pick up a couple units if they were in the $50 
> price range give or take.
> Its been a long wait for a complete plug-and-play solution for PET card 
> storage....
> Steve

       Message was sent through the cbm-hackers mailing list
Received on 2011-05-31 05:00:03

Archive generated by hypermail 2.2.0.