[Fwd: Re: Schematic MAX Basic cartridge for download]

From: Jim Brain (brain_at_jbrain.com)
Date: 2008-11-17 01:31:56

The schematic he refers to in zimmers is the one Ruud did:

http://www.zimmers.net/cbmpics/cbm/max/ultimaxSchematic.gif

Is there any way to fix this?

Jim

-------- Original Message --------
Subject: Re: Schematic MAX Basic cartridge for download
Date: Fri, 14 Nov 2008 13:12:53 -0800 (PST)
From: Sam <siem.appelman@quicknet.nl>
Organization: http://groups.google.com
Newsgroups: comp.sys.cbm
References: 
<7257f2f4-86c8-4f77-81fe-d4b534ec0a38@n1g2000prb.googlegroups.com> 
<6o3et1F1lkamU1@mid.individual.net> 
<4e227edc-f43c-482a-b9b7-7406f54dfa91@e1g2000pra.googlegroups.com> 
<86770d7d-6391-436c-bd64-ea34c31e09f6@1g2000prd.googlegroups.com>

  - Tekst uit oorspronkelijk bericht weergeven -

Hello Steve,

You are right about the labelling, but that makes no sense for working
of the cartridge.
But I found out  the schematic on zimmers.net is not correct.

On the cartridgeport the pin numbers 1 - 22 and A -Z are reversed.
And pins 14 and 15 on that schematic, who are in fact 8 and 9, are not
connected ??
In that case connecting pin 9 and 10 in my schematic should make no
sense, but is does !
With pin 9 and 10 open, no cursur on the Max...

I found another MAX schematic that should be allright:

http://members.lycos.nl/ijmtu/hpbimg/MAX%20machine%20schematic.jpg

Greetings, Sam

       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.