From: B. Degnan (billdeg_at_degnanco.com)
Date: 2008-01-22 13:56:58
At 09:20 PM 1/21/2008 -0600, you wrote:
>B. Degnan wrote:
>>
>>>
>>>I received my board on Friday and assembled it today. Thanks to all who
>>>have helped realize this project, particularly Ruud, Jim, and Al.
>>>
>>>The holes for the 40-pin socket appeared to be a bit smaller than the
>>>others. I could not get the 40-pin socket included with the kit to fit
>>>in these holes easily. I enlarged the holes slightly and then a socket
>>>with machine-tooled pins just fit.
>>
>>Thanks for the picks, Mike.
>I wonder what happened? The socket fit tight on my board, but it fit.
>
>
>
No big deal, I will get a socket with the thin pins, mine were the
"flatter" kind. I am not going to drill larger holes.
Bill
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.