From: William Levak (wlevak_at_sdf.lonestar.org)
Date: 2007-04-04 07:26:15
On Wed, 4 Apr 2007, Anders Carlsson wrote: > Hello again, > >> I would start with the EPROMs > > After express delivery (ordered on Wednesday, shipped from Canada on > Thursday, arrived in Sweden on Tuesday!), I have now received my EPROM > burner/reader. > > I have carefully removed the three EPROMs and read them one after > eachother. The 2764:s seem to be fine, but I'm unsure if I managed > to successfully read the AM27128. The reader software supports two > versions, 21V Vpp or 12.7V Vpp. As long as I'm only reading, it should > be the same voltage, but at one setting I only get $FF (empty chip) > and at the other setting I'm getting some kind of consistent, if not > so intelligent data. > > I haven't analyzed these dumps more than quickly comparing them to > the ROM set in WinVICE xplus4, and found that at least a few text > strings are the same, so they can't be completely mush. > > For those interested, you can download the archive here, and see if > you can parse the raw data. Obviously the .bin files are without a > loading address, as I frankly don't have a clue where in the memory > map they should go. ted-lo looks like $8000-BFFF ted-hilo looks like $C000-DFFF ted-hihi looks like $E000-FFFF $390-770 in ted-lo looks like it should be the command list, but it is obviously garbled. wlevak@sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.org Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.