From: Nicolas Welte (no_spam_at_x1541.de)
Date: 2005-11-27 20:15:31
Daniel Kahlin wrote:
>> On Sun, 27 Nov 2005, Nicolas Welte wrote:
>>
>>> I swapped the resistors for Luma 1,2,3 with the three 680 Ohm
>>> resistors. The white on cyan is now actually readable! I think I can
>>> live with it now :)
>
>
> I added a description of a possible complete fix on my page.
> It is not tested other than the test of the Luma fix Nicolas did.
> I need help with people evaluating it!
> http://www.kahlin.net/daniel/dtv/
Meanwhile I ran the 256color program on my unit. The palette is much
better now, but still every 2nd step is missing, as was to expect. I
then replaced the remaining 330 Ohm resistor with a 680 one as well
(only had one with wires!), but the improvement still wasn't very big.
Now I see all steps, but they are uneven, and if you don't look *very*
closely, some steps still cannot be seen. I think we need a fix now to
make the white really white, so we have a bigger colorspace to work with.
Nicolas
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.