Re: More questions from a newbie

From: Spiro Trikaliotis (ml-cbmhackers_at_trikaliotis.net)
Date: 2005-03-08 19:09:06

Hello,

* On Tue, Mar 08, 2005 at 06:18:42PM +0100 Jordi Delgado wrote:
 
> However, I've not solved yet the transfer PC->8296. Thus:
> 
> - What do you think of the 64HDD system? Will it work on the 8296?  I
> guess so, provided a 1541 or 1541-II could be used with the 8296.  Is
> it possible?

If I'm not mistaken ;-), the 8296 does not support the IEC serial bus.
Thus, a 1541 is out of question.

Anyway, the 1541 is just a 2031 where the IEC parallel bus has been
replaced by an IEC serial bus. The 2031 and the 1541 share the same disk
format. BTW: The 4040 shares the disk format, too.

Thus, another option would be to connect a 1541 to your PC, transfer the
data to it using some of the available tools (like Star Commander,
cbm4linux, cbm4win), put the floppy into a 2031 or 4040 drive, and read
it from there into the PET.

Yes, I know, this is not the best setup, but it should work.

HTH,
   Spiro.

-- 
Spiro R. Trikaliotis
http://www.trikaliotis.net/
http://cbm4win.sf.net/

       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.